|Home||» Products||» Products||» Environmental Products||» Mobile Bio Toilets|
Mobile Bio Toilets
- Minimum Order Quantity
- Unit of Measure
Trailer mounted, comprises of body shell withsump tank, sturdy trailer with platform on both the sides and towing/ emptyingarrangement for effective use. Necessary electrical fittings and accessoriesincluding point wiring shall be provided on the mobile toilet unit. Options ofWestern and Indian are available. The panelling and structural members of M.S.of the entire body shell and trailer shall be painted internally and externallyas per the standard practice i.e. one inner coat of anti-corrosive paintfollowed by two outer coats of best quality synthetic enamel paint. Weldingjoints shall be welded continuously. Steel joints shall have a coat of approvedanti-rust paint. All finishing point work shall be free from dirt and dust.Fitting & coupling shall be capable operation with ease and minimuminconvenience.
The toilet seats will bein construction moulded cubicles with internal toilet pan fixed to themain base frame by FRP material. The internal clear height will beappropriate for the convenience. The toilet seats shall be provided in sucha way that it can be cleaned quickly by jet of water. The size of the panmay be 450 mm as per the suitability of the layout of the W.C. The W.C.pan will be of good quality FRP or equivalent material.
All FRP wall panels, door panels, roofpanels will be fixed with M.S. angles. Wherever necessary, the M.S stripsshall be inserted into the body shell. However, overall wall thicknessshall be maintained to approximately 20 mm for strength. Each skin of theFRP shall be of minimum 1.2 mm thick for shouldering the load. All panel/ doorframes, joints sections etc. will be covered by FRP specially designedstrips. The roof will be moulded structure in FRP. The sides of theroof shall have slope on both sides with provision for skylight to have anatural light during daytime.